Harley Davidson Grip Removal

For example a 2019 Harley-Davidson Street 750 model in Vivid Black with sale price of 7599 10 down payment and amount financed of 683910 60 month repayment term and 399 APR results in monthly payments of 12592.

Harley davidson grip removal. Remove the grip from the handlebar. Slide the new grip onto the handlebar and check that the flanges at the end of the grip line up with the channel in the switch housing. In this particular video we installed Roland Sands Tracker Grips For Harley Fly-By-Wire on a 2016 Harley Dyna Low Rider S.

Remove the left grip. Be careful and try a heat gun or hair dryer enough to loosen the contact cement you used on the grip and try to rotate the grips. To remove the old grip not caring whether you destroy it cut off the very end of it.

The instructions provided with the Tracker grips say to use a long-shank flat tip screwdriver to remove the grip but I found that slicing the grip with a sharp knife and then. Once clean wipe the bars with some light oil to help the throttle rotate easier. The carb cleaner should breakdown the old adhesive so you can twist off the old grip.

Remove the grip by carefully cutting it away from the handlebar using a sharp blade or knife. Remove the end cap from the existing left handlebar grip if equipped. If the seal cap is still fastened to the index pins inside the old throttle grip it.

Upon removing the grip check the location of the seal cap. Carburetor cleaner between the grip and the handlebar. Remove the clamp and position the clutch hand lever assembly away from the handlebar.

You can also use compressed air to try to break the adhesive bond. IF YOU APPRECIATE THESE FREE DIY VIDEOS PLEASE CONSIDER SUPPORTING US ON PATREON TO ASSURE WE KEEP RELEASING THEM. You can change your hand grips for comfort looks or both.